User Manual

• Please go to the Bluetooth device list and if the OontZ Angle is listed please remove it. With the OontZ Angle removed or if was not listed,
restart your Computer and then try again to pair and connect. For pairing and connecting Guide for your Windows system go to
TheOontZ.com/Pairing
• If your Windows system displays an error message requesting a driver you need to update your computer's Bluetooth driver. The OontZ
Angle 3 does not require a special driver itself and there is no driver for it. Go to the support site for your system manufacturer and
specific model and select the Bluetooth driver. Download and install the Bluetooth driver, restart your system and try again to pair and
connect to your OontZ Angle 3 speaker. For pairing and connecting Guide for your Windows system visit TheOontZ.com/Pairing
Page 16
No audio playing from the OontZ Angle 3 when connected over Bluetooth
• Reset the OontZ Angle 3, follow the reset instructions on page 19.
• Remove the OontZ Angle 3 from the Bluetooth device list on your Bluetooth audio source device, restart your audio source device, and then
re-pair and connect to the speaker.
• Make sure the volume is up on your OontZ Angle 3 and your Bluetooth audio source device.
• Make sure your Bluetooth audio source device is playing audio, and is not paused and volume is up.
• Your Bluetooth audio source device may be out of range, move closer within 30 unobstructed feet.
• Turn your OontZ Angle 3 off and back on.
• Some apps have their own volume setting. Please check the app to make sure the volume is not on mute and the volume is up.
Troubleshooting
Cannot pair or connect to the OontZ Angle 3 (continued) --
-- For Windows systems