User Manual

If you're having trouble trying to connect your Amazon Echo Dot to your OontZ Angle 3
Poor quality or skipping audio when connected to Amazon Echo Dot
Your OontZ speaker's battery charge becomes drained when connected to Amazon Echo Dot despite not playing audio
• Make sure that the OontZ Angle 3 is not connected to any other audio source device. If the blue light is solid you will need to disconnect the
currently paired audio source device (see page 7).
• Check that the battery for your OontZ speaker has a sufficient charge, plug your speaker into a charging source.
• Disconnect any other Bluetooth devices from Amazon Echo Dot. Amazon Echo Dot can only connect to one Bluetooth device at a given time.
• Try to reconnect the OontZ speaker to Amazon Echo Dot. Set the speaker to pairing mode, and then say, "Alexa, connect my speaker" or “Alexa, pair”
• Amazon Echo Dot continues to communicate to the speaker even when it is not playing audio. The Amazon Echo Dot is keeping the
speaker on and ready to play. In order to conserve your speaker's battery charge, you can turn the OontZ Angle 3 off by pressing and
releasing the Power button on the OontZ Angle 3, or say "Alexa, disconnect my speaker" when you are done listening and the OontZ
Angle 3 will automatically turn off after 15 minutes.
• Make sure you have an adequate WiFi signal to your Amazon Echo Dot. Move your Amazon Echo Dot to a location with a stronger signal and
away from sources of interference, such as microwave ovens, baby monitors, and other wireless devices.
Page 18
Troubleshooting