User Manual

Pair & Connect -- Step 1
- Your audio source device needs to be within 33 unobstructed feet of the OontZ Angle 3
- Make sure your OontZ Angle 3 battery has a sufficient charge
Turn ON your OontZ Angle 3
The Bluetooth LED Light (Blue) will turn on.
If the blue light is flashing the OontZ Angle 3 is ready to pair and connect.
If the blue light is solid the OontZ Angle 3 has automatically reconnected to the last
audio source device the speaker was connected to and is ready to play. Note: The OontZ
Angle 3 will automatically try to connect to the last audio source device it was connected to each
time it is turned on and that audio source device is within range.
The OontZ Angle 3 can be connected to one audio source device at a time.
To pair and connect to a different audio source device, you need to first disconnect the
currently paired audio source device. To disconnect it, press and hold down the Bluetooth button
for 3 seconds. The blue light will begin flashing and the OontZ Angle 3 is ready to pair and connect.
Page 7