PCWorks Speaker System by Henry Kloss ™ Installation and Operating Instructions © 1998 Cambridge SoundWorks, Inc.
IMPORTANT The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user of the presence of uninsulated “dangerous voltage” within a product’s enclosure that may be of sufficient magnitude to constitute the risk of electric shock to persons. WARNING AVIS SHOCK HAZARD DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SUBWOOFER’S COVER. NO USER-SERVICEABLE PARTS INSIDE.
IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS - All safety and operating instructions should be read before the PC Works amplified subwoofer/satellite system is operated. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. HEED WARNINGS - All warnings on the subwoofer and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
Contents PCWorks by Henry Kloss™ iii Safety Precautions ............................................................................... i, ii Thank You ............................................................................................... 1 Inspecting For Damage ........................................................................... 2 Getting Started ........................................................................................ 2 Satellite Cube Connections .........................
Thank You T hank you for purchasing PCWorks by Henry Kloss. We think you will find its sound quality astonishing considering its very small size. At Cambridge SoundWorks, we started with the assumption that computer users care no less about sound quality than music lovers. We have developed a totally new speaker system, lavishing as much effort on its design as on that of our critically-acclaimed Ensemble® speakers. Thus PCWorks sounds more like our home stereo systems than typical “multimedia” speakers.
Inspecting For Damage Examine each speaker unit carefully for shipping damage. If there is any, do not install or use the system. For advice, call the store where you made your purchase. Getting Started All the items shown in the illustration below should be included with your system. If anything is missing, notify your retailer. Save the carton and its inserts in case you need to ship or move your PCWorks system later. For your convenience, an overall wiring diagram appears on page 13.
Satellite Cube Connections Connect the speaker wire from one satellite to the right speaker output (+ R –) of the subwoofer. Connect the conductor with the red band to the red (+) terminal. Connect the other conductor to the black (–) terminal. Connect the speaker wire from the other satellite to the left speaker output (– L +) of the subwoofer.
Program Source Connections hiss, or if the PC Works Volume Control adjustment range is unsatisfactory, readjust the program source’s level control up or down (and the PC Works Volume Control accordingly).
Connecting Music Sources OFF DCIN PHONES LINE OUT 1 Mounting The Volume Control The enclosed mounting strip is semipermanent—it holds well but can be peeled off gently. Be sure that the mounting surface, such as the computer monitor or your desktop, is smooth and clean. 2 BASS BOOST M FRO CE SOUR TO SUB MAX MIN TO FROM SUB SOURCE SOUNDWORKS Program Source S RK WO ND MIN SOU Some portable players have “bass boost” circuits designed for their small headphones.
Power Connections PC Works Subwoofer Control Panel Connect the AC-to-DC Power Adapter to the PCWorks 12V DC input. The power supply for the PCWorks stays on all the time the subwoofer is plugged in. For this reason, it may remain warm to the touch. This is normal, but it’s a good idea to unplug the unit when you are away for a week or more.
Attaching The Stands For most applications, the cube speakers should be attached to their desktop stands. Install each stand by inserting it into the “T” shaped socket in the back of each satellite. Make sure to feed the wire through the cut-out in the top of the stand’s back panel.
Playback Levels Controlling Background Noise and Distortion PCWorks is intended for individual or small group listening and will achieve surprisingly high output levels. However, playing the system continuously at overly loud, distorted levels on heavy bass program material may cause its internal fuse to blow. The fuse can be replaced only by a qualified representative.
PCWorks With A Computer Install the stands in the cubes and place them to either side of the monitor, aimed straight ahead. The cubes are magnetically shielded Place the subwoofer on the floor under your desk or workstation, back against the wall. Do not place it up on the work surface or a shelf, which could result in disappointing bass performance (see text to the right). The subwoofer is also magnetically shielded. • Have a clear line of sight from your listening position to the cubes.
PCWorks As A Music System MOZ ART Sym No. phonies 39 & 41 For recorded performers to appear “on stage” in front of you, place the cubes to form a roughly equal-sided triangle with your favorite listening position. But by all means, take advantage of their tiny size and experiment liberally with their placement (see text for suggestions). Place the subwoofer on the floor against a wall (surfaces that acoustically support the bass).
PCWorks With A TV Set The cubes are magnetically shielded, and so can be placed close to your TV if necessary. Placing them too far apart can keep dialogue from sounding like it’s coming from the screen. (Wall-mounting instructions are on page 13). Place the subwoofer on the floor against a wall (surfaces that acoustically support the bass). Placing it out from the wall and/or up on a shelf could result in disappointing bass performance (see text to the right). The subwoofer is magnetically shielded.
Using PCWorks Outside The Home Difficulty? PCWorks will operate properly from the nominal 12 Volt electrical systems in automobiles, recreational vehicles and boats. PCWorks will provide satisfying music listening when used with these power sources, so long as the background noise levels are similar to a home environment. Please note: PCWorks is not a “car speaker”. It is not designed to overcome the high background noise levels present in many moving vehicles (cars, boats or RV’s).
Mounting The Cubes Wiring Diagram To a flat surface: Cube Speaker To mount the satellite cubes to a wall, the side of a monitor or other flat surface, use the selfadhesive “hook and loop” fastener squares.
Technical Support Inside U.S.A., Canada and Latin America Creative Labs Inc. Technical Support Inside Europe Creative Labs (Ireland) Ltd. Technical Support If you need technical assistance, call 405-742-6622. Technical support is available seven days a week from 8:00 am to midnight, Central time. You can get the latest program and driver updates from Creative Labs’ bulletin board, 24 hours a day.
Holland Italy Norway Scandinavia Spain Sweden UK Tel: Tel: Tel: BBS: +3115578244 +39 2 982 4 4100 800 11663 (Freephone) +45 4824 4351 (HST V.34) +45 4824 4361 (ZyTEL 19,200) Tel: Fax: Tel: Tel: BBS: +45 4824 4322 +45 4824 4323 900 953536 (Freephone) 020 791088 (Freephone) +45 4824 4351 (HST V.34) +45 4824 4361 (ZyTEL 19,200) +44 01734 344 744 +44 01734 320 271 +44 01743 360 287 Tel: Fax: BBS: Inside Asia Creative Technology Ltd.
Important Playback Levels PCWorks is intended for individual or small group listening and will achieve surprisingly high output levels. However, playing the system continuously at overly loud, distorted levels on heavy bass program material may cause its internal fuse to blow. The fuse can be replaced only by a qualified representative. To avoid this inconvenience and a possible non-warranty repair charge, reduce the playback volume when the system shows obvious signs of stress, i.e.
1-Year Limited Warranty o the original purchaser, Cambridge SoundWorks, Inc. will warrant the PCWorks system to be free of defects in material and workmanship for a period of one (1) year from date of purchase. With respect to defects, Cambridge SoundWorks will, at its option, replace the product or repair the defect in the product with no charge to the original purchaser for parts or labor.
311 Needham Street, Newton, MA 02464 1-800-367-4434 Fax: 617-527-3194 www.hifi.com or e-mail us at info@hifi.com P81-1080 898 Rev.