User Manual

- Plug one end of a 3.5mm stereo audio cable into the
AUX IN Jack on the speaker.
- The Blue Light will turn solid Green.
- Plug the other end of that 3.5mm stereo audio cable
into the headphone jack on your device.
- Make sure both ends of the cable are fully inserted
- You are now ready to play.
3.5mm stereo audio cable is sold
separately and is available at:
Important: The Bluetooth on the OontZ Angle 3 Shower - PLUS Edition is disabled when a 3.5mm stereo audio cable is connected to
the speaker.
Page 20
Important Notes:
- The Alexa function will only work when connected over Bluetooth to your iPhone or Smartphone running the Android operating
system. It will not work when connected with the 3.5mm Stereo Audio Cable.
- Note: The rubber flap needs to be closed before the speaker is exposed to water. The speaker is not water-resistant or
waterproof when the flap is open.
- The volume control on your device and the speaker work independently of each other. To play the speaker at the loudest volume, set
the volume on your device to maximum and raise the volume on the speaker to maximum.
Turn ON your OontZ Angle 3 Shower - PLUS Edition
To Play with Non-Bluetooth Devices Use a 3.5mm Stereo Audio Cable
TheOontZ.com/accessories