740C Upsampling compact disc player User’s manual 2 ENGLISH azur
Contents Introduction Introduction .................................................................................................2 Thank you for purchasing this Azur 740C Upsampling Compact Disc Player. We hope that you will appreciate the results and enjoy many years of listening pleasure from it. Limited warranty..........................................................................................3 Safety precautions ..............................................................................
740C Limited warranty Safety precautions Cambridge Audio warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below). Cambridge Audio will repair or replace (at Cambridge Audio's option) this product or any defective parts in this product. Warranty periods may vary from country to country. If in doubt consult your dealer and ensure that you retain proof of purchase.
Important safety instructions Please take a moment to read these notes before installing your 740C, as they will enable you to get the best performance and prolong the life of the unit. We advise you follow all instructions, heed all warnings and keep the instructions for future reference. Ventilation IMPORTANT - The unit will become hot when in use. Please ensure there is ample ventilation (at least 10cm clearance all round). Do not put any objects on top of this unit.
azur 740C Manufactured in an ISO9002 approved facility Power Incorporating Q5™ from: Off azur 740C Upsampling Compact Disc Player Caution Risk of electric shock. Do not open. ANAGRAM TECHNOLOGIES Designed in London, England On Power Rating: 230V AC ~ 50Hz Max Power Consumption: 25W Avis Risque de choc electrique. Ne pas ouvrir.
Front panel controls 5 azur 740C Upsampling Compact Disc Player Standby / On Menu Select 1 2 3 4 1 Standby/On Switches the unit between Standby mode (indicated by dim power LED) and On (indicated by bright power LED). Standby is a low power mode where the power consumption is less than 10 Watts. The unit should be left in Standby mode when not in use. 6 Menu Play Pause Stop Skip Scan 7 8 9 10 7 Open/Close Allows you to open and close the disc tray thus making it possible to load a disc.
40C Remote control Remote control of matching products The 740C is supplied with an Azur Navigator remote control that operates both this CD player and other Cambridge Audio Azur amplifiers. Insert the supplied AAA batteries to use. Amp Control mode The 740A/C remote control comes with an Amplifier Control button, that when pressed, puts the remote into Amp mode, allowing operation of a Cambridge Audio Azur amplifier.
Operating instructions Loading and unloading discs Repeating discs and tracks 1. Press the Standby/On switch. 1. Ensure that the disc is playing. 2. Press the Open/Close button. 2. Press the Repeat button on the remote control. ‘Repeat All’ will appear on the display. The whole disc will now be repeated until the function is turned off. 3. When the disc tray has opened fully, place a disc carefully in the tray with the label side facing up. 4. To close the disc tray, press the Open/Close button again.
azur 740C 2. Press Program on the remote control. The Program set-up will appear in the display. Manufactured in an ISO9002 approved facility Designed in London, England Line Output Control Bus In IR Emitter Out In Digital Outputs Left azur 640T DAB/FM Tuner V2.0 Power Rating: 230V AC ~ 50Hz Max Power Consumption: 15W Vorm öffnen des gerätes. Netzstecker ziehen. Right www.cambridge-audio.
CD player setup The 740C has a custom-made display on the front of the unit showing the current status and allowing access to the 740C System Configuration menus. The 740C features some advanced settings that allow its use to be customised to user preference. Menu structure Press the Menu button to scroll through the menus, then use the Select button to scroll through the options/sub menus of that menu.
740C Custom installation (C.I.) use Technical specifications Control Bus The 740C features a Control Bus input/output that IR Emitter allow un-modulated remote control commands (positive logic, TTL level) to be received electrically by the unit and looped to another unit if desired. These control commands are typically generated In In Out by custom installation (multi-room) systems or remote IR receiver systems. The Control Bus sockets are colour-coded orange.
Cambridge Audio Gallery Court Hankey Place London SE1 4BB England © 2007 Cambridge Audio Ltd AP20109/1 www.cambridge-audio.