User`s manual

550C/650Cazur

Rear panel connections

AC power socket

Once you have completed all connections to the ampliﬁer, plug the AC

power cable into an appropriate mains socket and turn the unit on. Your

compact disc player is now ready for use.

Power On/Off

Switches the unit on and off.

Control Bus

In Allows un-modulated commands from multi-rooms systems or other

components to be received by the unit.

Out Loop out for control bus commands to another unit.

IR (Infra Red) Emitter In

Allows modulated IR commands from multi-room systems or IR repeater

systems to be received by the unit. Commands received here are not

looped out of the Control Bus. Refer to the ‘Custom Installation’ section

for more information.

Line Output

Use good quality interconnect cables from these sockets to any line level

input on your ampliﬁer. For best results and matched performance, we

recommend connection to a Cambridge Audio Azur ampliﬁer.

S/P DIF co-axial digital output

For input to a separate DAC, such as Cambridge Audio DacMagic

, or

digital recording machine. To obtain best results, use a high quality

75ohm digital RCA interconnect cable (not one designed for normal audio

use).

TOSLINK Optical digital output

Use to connect to the input of a separate DAC

or digital recording

machine. Use a high quality TOSLINK ﬁbre optic interconnect cable.

Note: To obtain the best results from your system we recommend using

only high quality Cambridge Audio interconnects. This will ensure that you

hear your system as we designed it. Please ask you dealer for details.

* For more information, see the DacMagic page on the Cambridge Audio website:

www.cambridgeaudio.com/products.php

ENGLISH