Operation Manual

651Wazur
ENGLISH
9
Conguration menu
In Standby mode, press and hold the Standby/On button to enter the
Conguration menu.
The Left and Right ‘Output’ LED will start blinking to indicate that you are
now in the Conguration menu.
Pressing the Standby/On button will shufe through these different
setting options:
Right ‘Protection’ LED - Auto power down enabled (by default).
Right ‘Protection’ and ‘Clipping’ LED - Auto power down and auto power
up enabled.
Left and Right ‘Output’ LED - All features are now disabled.
To exit the Conguration menu, press and hold the Standby/On button.
Note: If a second 651W is added to the chain, the below conguration
menu is applicable only to the second unit.
Left ‘Protection’ LED - Second 651W enabled.
Left and Right ‘Protection’ LED - Second 651W auto power down enabled.
Left ‘Protect’ and Right ‘Protect and Clipping’ - Auto power down and
auto power up enabled.