Operation Manual

851Eazur
ENGLISH
7
The 851E is supplied with a CA System remote control
that operates both this amplier and Cambridge Audio
851 series and Stream Magic products. Insert the
supplied AAA batteries to activate.
The functions relevant to the amplier are as follows:
1
Standby/On
Switches the amplier between On and Standby mode.
2
Brightness
Adjust the backlight of the front panel display; bright,
dim or off.
3
Mute
Mutes the audio on the pre-amplier. The mute mode is
indicated by Mute appearing and the volume level being
replaced by two ashing dashes in the display. Press
again to cancel mute.
4
Volume
Increase or decrease the volume of the amplier output.
5
Illuminate button
Press to illuminate the buttons on the remote.
6
S1–S8 Sources
Used to select the source inputs.
7
Trigger 1 and Trigger 2
Pressing either button to toggle on/standby a 851W
power amplier that is connected through the rear
Trigger Out 1 or 2.
Remote control
1
2
3
4
4
6
5
7