Use and Care Manual
Assembly (continued)
I
x3
PP
S
11
 
Attach the metal brackets(S) to all three 
sides of the firebox and two sides of the 
mantel to ensure that your firebox does 
not move around as you use it. Insert 
and tighten the 2 (PP) screws. Attach the 
left and right side trim by inserting and 
tightening 2 (PP) screws.
1 spare (PP) screw included.
Insert the firebox insert(P) into the mantel from
the rear. Be careful not to scratch the base(B).
Viewing from the front check that the insert is centered. 










