MANTEL MODEL X5021-2CHR X5021-2TEK X5021-2BLK X5021-2GRY X5021-2MAH X5021-2WHT X5021-2WAL 1 REV19-02
PACKAGE CONTENTS PART A B C D E F G1 G2 H I J K AA BB CC DD EE FF SS DESCRIPTION QTY. Top Panel Top Shelf Left Side Panel Right Side Panel Left Inner Panel Right Inner Panel Lower Back Panel Lower Back Panel Base Upper Back Panel Left Door Right Door Bolt Metal Connector Handle Screw Cabinet Door Hinge M4x20 screw Safety Chain PART NO. 1 1 1 1 1 1 1 1 1 1 1 1 20 20 2 24 4 2 1 Carefully remove all pieces from the carton and make sure that you have all parts listed (refer to parts list on page 2-3).
PACKAGE STEPS 1. AA X8 H 2.
PACKAGE STEPS 3. BB X2 BB X2 4.
PACKAGE STEPS 5. AA X4 B 6.
PACKAGE STEPS 7. BB X2 BB X2 8.
PACKAGE STEPS 9. AA X2 D 10.
PACKAGE STEPS 11. D 12.
PACKAGE STEPS 13. I 14.
PACKAGE STEPS 15. A 16.
PACKAGE STEPS EE X2 17. J CC DD X4 FF 18.
PACKAGE STEPS 19. DD X8 J 20.
PACKAGE STEPS IMPORTANT - Safety Chain Installation WARNING: This mantel is heavy furniture. Please be sure to correctly attach the safety chain to both the mantel and an adjacent wall. Failure to do so can cause serious injury or death. INSTALLATION: Assemble the mantel and place it in position Attach one end of the chain to a wall stud using the screw included Attach the other screw – through a link in the chain – to the center of the mantel’s top board (you may need to drill a small starter hole).
