Instructions / Assembly

PACKAGE STEPS

IMPORTANT - Safety Chain Installation

WARNING:

INSTALLATION:

This mantel is heavy furniture. Please be sure to correctly attach the safety chain to both the mantel and an adjacent wall.

Failure to do so can cause serious injury or death.

Assemble the mantel and place it in position

Attach one end of the chain to a wall stud using the screw included

Attach the other screw – through a link in the chain – to the center of the mantel’s top board (you may need to drill a small

starter hole). Put the screw through the chain link that allows the least amount of slack in the chain.

Carefully test that the installed chain adequately prevents tipping or tilting of the mantel.

NOTE: The chain must be as short as possible to prevent the mantel tipping forward. Do not allow slack in the chain.