Use and Care Guide

REMOTE CONTROL
*
A master button is located on the top left hand side of the insert. This button must be
turned ‘On’ to operate remote control. Turn button to ‘Off’ to disable the use of the remote
control.
Light bulbs may become loose during shipping. If the simulated flame effect is dim or does
not operate properly at first, please ensure that the light bulbs are properly secured in
the sockets (bulbs should be finger tight. Do not over tighten).
See “Replacing Light Bulb”section of this man
ual for instructions.
.
Remote Control Requires Two AAA Batteries not included.
1. Press the power button once to turn on the power.
Press the button again to turn off all functions.
2. This fireplace insert consists of a fan forced electric heater
with two heater settings, 800 watts or 1,500 watts.
Press the button once (the digital screen shows ‘Lo’).
Press the button a second time (the digital screen shows ‘HI’).
Press the button a third time to turn the heater off.
7
3. This electric fireplace is equipped with a timer ranging from
1 hour to 9 hours.
Press the timer button once for 1 hour, twice for 2 hours etc
(the digital screen appears from ‘1H
’ to ‘9H ’ when settings, and
so on).