MANTEL BLT-M-W-13 X5735-1BLK X5735-1GRY X5735-1MAH X5735-1WHT REV1902 1
PACKAGE CONTENTS PART A B C D E F G1 G2 H I J K L1 L2 AA BB CC DD EE SS DESCRIPTION QTY. Base Across Panel Base Erect Panel Bed Plate Left Side Panel Right Side Panel Inner Panel Top shelf divider Top shelf divider Back Panel Top Panel Lower Back Panel Top Trim Panel Left Trim Panel Right Trim Panel Bolt Metal Connector M4x25 Screw M4x16 Screw M4x12 Screw Safety Chain PART NO.
PACKAGE STEPS 1. A AA X2 2.
PACKAGE STEPS 3. AA X4 C 4.
PACKAGE STEPS 5. D E AA X4 AA X4 F E 6.
PACKAGE STEPS AA X4 7. G1 BB X4 8.
PACKAGE STEPS H 9. 10.
PACKAGE STEPS I 11. BB X8 12.
PACKAGE STEPS 13. F K K CC X8 L1 14.
PACKAGE STEPS L2 15. E CC X3 L2 DD X4 16.Inserting the fire box（X50WMEF1BLK/WHT） (1). Remove the outer glass from the fire box (Please refer to the fire box manual ( Page 6) supplied with the fire box) (2). Set the fire box into the mantel and secure the side trim pieces on the mantel with screws.
PACKAGE STEPS (3). Reinstall the glass pane onto the fire box.
PACKAGE STEPS IMPORTANT - Safety Chain Installation WARNING: This mantel is heavy furniture. Please be sure to correctly attach the safety chain to both the mantel and an adjacent wall. Failure to do so can cause serious injury or death. INSTALLATION: Assemble the mantel and place it in position Attach one end of the chain to a wall stud using the screw included Attach the other screw – through a link in the chain – to the center of the mantel’s top board (you may need to drill a small starter hole).
