Operation Manual

EDGE NQ
7
EN ITDE SVFR RUES 中文 日本語
1 3 5 127 9 112 4 6 8 10 13
Rear panel
1. AC POWER SOCKET
2. VOLTAGE SELECTOR SWITCH
Note: For use by Cambridge Audio service
personnel only.
3. PRE OUT
4. USB AUDIO IN (D5)
For connecting to PC/MAC computers.
(Class 2 USB Audio only. Windows based PCs
require a Cambridge Audio USB driver to be
installed before connection)
5. AUDIO RETURN CHANNEL (ARC)(D4)
Connection from a TV that supports
ARC function.
6. UNBALANCED (A1 AND A2)
BALANCED XLR (A3)
7. DIGITAL INPUTS (D1, D2 AND D3)
8. RS232
Custom install control - a full protocol is
available for the Edge NQ on our website.
9. LINK
Use the Link cable between the Edge NQ and
Edge W to synchronise power on/standby.
10. USB MEDIA
For connecting local media storage. Note that
the USB ports are not intended for connection
to Apple mobile devices; no functionality,
charging or otherwise is supported.
11. BLUETOOTH ANTENNA
Used for wireless streaming Bluetooth audio
directly from most phones, tablets and laptops.
See Bluetooth section for details.
IMPORTANT
To use the UPnP media playing feature, Internet
radio, streaming services or to receive product
software updates, you will need either a wired
Ethernet or Wi-Fi connection to your network.
12. USB WIFI
Connect the supplied Wi-Fi dongle to the correct
USB input on the rear of Edge NQ – it will need to
be within range of your wireless router.
Important note: Do not connect/disconnect the
Wi-Fi dongle when the unit is on.
13. ETHERNET
Use a wired connection for seamless playback of
high resolution 176.4kHz, 192kHz and DSD128.