Operation Manual

EDGE W
9
EN ITDE SVFR RUES 中文 日本語
There is no power
• Ensure the AC power cord is connected
securely.
• Ensure the plug is fully inserted into
the wall socket and is switched on.
• Check fuse in the mains plug or
adaptor.
There is no sound
• Make sure the unit is not in Standby
mode.
• Check that source component is
properly connected.
• Check that your speakers are properly
connected.
There is no sound on one channel
• Check speaker connections.
• Check interconnects.
There is weak bass or diused stereo
imaging
• Ensure that speakers are not wired out
of phase.
There is a loud buzz or hum
• Ensure no interconnects are loose or
defective.
Troubleshooting
If you experience any trouble with your Edge W, visit the help section on our
webpage at http://techsupport.cambridgeaudio.com