User`s manual

USB input
The USB socket is suitable for playing MP3 and WMA music files contained on USB
memory devices.
Note: Use only simple file storage (flash drive) USB devices, USB drives which contain
operating or other backup software or which are designed to be used in conjunction
with a computer running proprietary software may not work. (E.g. SanDisk Cruzer™).
This unit has been tested with USB devices to a capacity of up to 8GB.
MP3 input
This input allows you to connect the audio outputs of a portable audio device such as
an MP3 player, connected to the front panel 3.5mm stereo-jack input. Press the
Source button and select AUX1/MP3 mode to select this input.
Note: When a device is plugged into the MP3 socket, any input on the Aux 1 rear
terminal is over-ridden for as long as the plug is inserted.
CD Disc slot
Supports Audio CD’s (CD-DA), MP3 files and WMA files played from CD, CD-R or CD-RW
discs.
Display
LCD used to display functions, sources, settings etc. Refer to ‘Operating instructions’
for more information.
Shift/Presets
One can store up to 10 presets for each of the DAB and FM bands. The Shift button
alternates accessing presets 1-5 and 6-10. In CD/USB/SD mode when Program
function is not selected, these buttons can be used to select track numbers (e.g Track
1 play by pressing 1). Pressing the Shift button will cycle between 1-5 and 6-10.
7
11
10
9
8
11
ENGLISH
Note: Pressing and holding down the Info button for five seconds in DAB mode will
initiate DAB station scanning, please see section on page 17.
FM mode – RDS station name (Radio Data System), time/date, program type, audio
mode, alarm status, sleep status and clock status.
CD mode – elapsed track time, remaining track time, alarm status, sleep status and
clock time.
iPod mode – alarm status, sleep status and clock time.
USB mode – album number, artist name, filename, alarm status, sleep status and
clock status.
SD Card mode – album number, filename, artist name, alarm status, sleep status and
clock time.
SD card slot
Insert an SD card containing MP3/WMA music files for playback.
Note: It is recommended to use a card no greater than 8GB in file size with a FAT (e.g
FAT16, FAT32) file format.
It is not possible to guarantee playback from all card manufacturers. Always use a
high quality brand. One is compatible with both standard SD and high capacity SDHC
cards of up to 8GB.
Infrared sensor
Receives IR commands from the supplied remote control. A clear unobstructed line of
sight between the remote control and the sensor is required.
Phones
Allows for the connection of stereo headphones with a 3.5mm jack plug. Headphones
with an impedance of between 32 and 600 ohms are recommended.
Note: Plugging in headphones will automatically mute the loudspeaker output.
6
5
4