User`s manual

(Skip/Scan)

Use for skipping between tracks during playback and also for menu/function adjustment.

These buttons are also used to scroll through available stations in DAB/FM mode and

for clock/alarm/sleep settings. For more information refer to 'Operating instructions'.

Play/Pause

Plays and pauses playback.

Stop/Eject

Stops music playback from SD, USB & CD. If pressed again when playback has been

stopped in CD mode, this will then eject the CD.

Volume/Select (rotary dial)

Use to increase/decrease the level of the sound from the outputs of the unit. This

control affects the level of the loudspeaker and the headphone output. It does not

affect the 'Tape Output' connection. Pushing the volume control in activates the 'Select'

function to accept the item/function on the display when pressed.

Note: One will remember the volume level when put in Standby if the volume level is

not greater than 30 (e.g volume level 1-30). However, if the unit has been put in

Standby with the volume level greater than 30, it will default to volume level 30 when

turned back on to prevent an excessive level on turn-on.

The rotary dial can also be used to change/tune radio stations by pressing the Menu

button first then turning the dial. Press the dial in to accept current station selected.

Press repeatedly to access and adjust balance, bass level, treble level and X–Bass.

Note: These settings are remembered when the unit is put into Standby mode.

Front panel controls (continued) Remote control

One is supplied with a Navigator remote control. Insert supplied

AAA batteries to activate.

Alkaline batteries should always be used.

Eject

Ejects the disc from the unit.

Standby/On

Switches the unit between low power Standby and On modes.

0-9 numeric buttons

The functions of these buttons differ depending on source

mode selected:

Tuner (DAB/FM) mode – Press to recall a preset. Press and

hold to store a preset.

CD/USB/SD mode – Press the number of the desired track.

The playback will start from the beginning of the track.

Info

Press to select and view different information on the front panel

display. The information displayed depends on the current

source selected. See section on front panel info button.

Mute

Mutes the audio output on the unit. Press again to cancel mute.