User`s manual

ENGLISH

Using an iPod with the supplied DD30 docking station

One comes with the DD30 docking station for iPod. Connect the DD30 to the

connector located at the rear and insert an appropriate iPod dock adaptor for your

iPod. The DD30 is compatible with Apples standard dock adaptors, supplied with all

new iPod.

1. Press Source button until iPod source is displayed.

2. Use the buttons on the remote control to navigate

through iPod library.

3. Press  button to start playback.

4. Press Menu button to access iPod menu settings.

5. Press button to go back to previous settings/functions.

iPod compatibility

The DD30 is able to communicate with and control the following

iPod models:

iPod nano (1st, 2nd, 3rd and 4th generation)

iPod (4th generation, photo and 5th generation)

iPod classic

iPod touch (1st and 2nd generation)

iPhone (flight mode recommended)

Note: DD30 dock station also charges your iPod when docked even when One is in

Standby mode. This function will not work if 'Power' on the back of the unit turned off.

Repeat, Random and Program have no function in iPod mode.

Resetting the unit

A full reset of One can be performed by turning the unit on from the back panel whilst

holding down the Standby/On button on the front panel.

Note: This will erase all presets and other settings and cause the unit to perform a

full scan for DAB stations before starting up in DAB mode.