User manual
20 / 42
www.camcoaudio.com
USER MANUAL
Q-POWER 14
|
POWER AMPLIFIER
6
OPERATION
6.3 CAMCO USB MCB Updater
The
CAMCO USB MCB Updater
offers a set of different commonly used
mains breakers, and allows to permanently store it inside the amplifier. The
stored MCBs will be maintained even after power loss.
The application also can display a graph showing in detail each MCBs tripping
characteristic.
In case you do not find the appropriate (or any similar) breaker in the list of cur-
rently supported MCBs, please contact CAMCO for adding those MCBs to the
set. For adding, we would need the brand name, type name or number and, if
available, a datasheet showing the tripping characteristic graph.
But note that the highest continuous current of any MCB will always be limited
32 A max., even in the two lower mains voltage ranges.
No larger MCB can be selected and will be offered in the future, due to internal
hardware limitations.
l
NOTE
When connecting the Q-POWER 14 to your host computer with the USB
cable, the amplier will shut down completely and all LEDs will be switched
off. This behaviour is normal. The amplier will restart automatically once
the USB cable is removed.