User manual
23 / 42
www.camcoaudio.com
USER MANUAL
Q-POWER 14
|
POWER AMPLIFIER
8
FILTER CLEANING
8. Filter Cleaning
8.1 Removing the Filter System and Cleaning
The air intake on the front of your Q-POWER 14 amplifier is fitted with a removable
filter system. If the filter becomes clogged, the unit will not cool as efficiently as it
should and may lead to reduced output levels.
Q-POWER 14 Filter Assembly
Foam filter
Front frame
Screw
! WARNING!
Turn off and disconnect the amplier from the mains before removing the
front frame.
To clean or replace the filter just slightly unscrew the fixing screw with the help of
a 3 mm allen key. The screw will be held back by a small plastic spacer on the
back of the frame to avoid losing it. Then shift the front frame slightly to the right.
Then you should be able to remove the frame from the amplifier completely (pull
gently to avoid any bending of the front frame).