Owner's manual

INTRODUCTION
CONGRATULATIONS on your purchase of a new EQUALIZER
®
Rotary Positive Displacement Air Blower from Tuthill
Vacuum & Blower Systems. Please examine the blower for shipping damage, and if any damage is found, report it immediately
to the carrier. If the blower is to be installed at a later date make sure it is stored in a clean, dry location and rotated regularly.
Make sure covers are kept on all openings. If blower is stored outdoors be sure to protect it from weather and corrosion.
EQUALIZER blowers are built to exacting standards and if properly installed and maintained will provide many years of reliable
service. We urge you to take time to read and follow every step of these instructions when installing and maintaining your
blower. We have tried to make these instructions as straightforward as possible. We realize getting any new piece of equipment
up and running in as little time as possible is imperative to production.
WARNING: Serious injury can result from operating or repairing this machine without first reading the service manual
and taking adequate safety precautions.
IMPORTANT: Record the blower model and serial numbers of your machine in the OPERATING DATA form below. You will
save time and expense by including this reference identification on any replacement part orders, or if you require service or
application assistance.
OPERATING DATA
It will be to the user’s advantage to have the requested data filled in and available in the event a problem should
develop in the blower or the system. This information is also helpful when ordering spare parts.
Model No. __________________________________ V-Belt Size ______________ Length _____________
Serial No. __________________________________ Type of Lubrication:
(Recorded from nameplate on unit) _____________________________
Startup Date ________________________________ ________________________
Blower RPM ________________________________ Pressure ___________________________________
Blower Sheave Diameter ______________________ Vacuum ___________________________________
Motor Sheave Diameter _______________________ Any other special accessories with this unit
Motor RPM _______________ HP ______________ ___________________________________________
NOTES:
4