Owner's manual

PARTS LIST - MODELS 6012, 6016, 6024
When ordering parts, use the item number shown, plus your model and serial number.
ITEM DESCRIPTION QTY ITEM DESCRIPTION QTY
1 Rotor, Drive 1 27 Washer 1
2 Rotor, Driven 1 29 Cap Screw 3
3 Housing 1 31 Drain Plug, Magnetic 2
4 End Plate 2 37 Breather 2
6 End Cover, Drive End 1 58 Seal Ring 4
7 End Cover, Gear End 1 62 Cap Screw 16
8 Timing Gear Set 1 68 Spring Pin 1
9 Bearing, Double Row Ball 2 70 Oil Sight Gauge 2
10 Bearing, Cylindrical Roller 2 80 Lockwasher 10
12 Lip Seal, Rotor Shaft 4 126 Spring Pin 4
13 Lip Seal, Drive Shaft 1 174 Pipe Plug 2
14 Retainer Plate 4 195 Lifting Lug 2
20 Oil Slinger 1 239 Sleeve 4
22 Dowel Pin 4 281 Spacer 2
23 Key, Drive Shaft 1 282 Wave Spring 4
24 Key, Gear 2 304 Mounting Foot 4 *
25 Washer 2 307 Cap Screw 10
26 Cap Screw 32
MODEL LOBE TO END PLATES INTERLOBE
GEAR END DRIVE END TIP-DOWEL TIP-PORT MININUM
6012 .005” - .009”
(.13 - 23)
.014” - .020”
(.36 - .51)
.008” - .013”
(.20 - .33)
.011” - .016”
(.28 - .41)
.012” - .016”
(.30 - .41)
6016 .005” - .009”
(.13 - 23)
.018” - .024”
(.46 - .61)
.008” - .013”
(.20 - .33)
.011” - .016”
(.28 - .41)
.012” - .016”
(.30 - .41)
6024 .005” - .009”
(.13 - 23)
.018” - .024”
(.46 - .61)
.011” - .016”
(.28 - .41)
.014” - .019”
(.36 - .48)
.012” - .016”
(.30 - .41)
LOBE TO CASING
ASSEMBLY CLEARANCES
Metric values (mm) are shown in parentheses ( )
All other values are in inches
21