User Manual

Ease. Comfort. Convenience.
Copyright - 2005-2011 - Garavuso Designs LLC
3.2
STEP
4
STEP
5
STEP
6
STEP
Page 2
If you purchased an adapter and
a ProStrap together they will
come pre-assembled, otherwise
attach your adapter to the
camera and refer to step 3.1.
Using the supplied allen wrench
attach the adapter/ProStrap to
your camera in the orientation
shown in figure 3.2-A. Adjust
the placement of the adapter
to be more or less centered
on the camera bottom. Verify
that you can still access your
Figure 3.2
3.2-A
Figure 4.
Lace the webbing through your
camera’s top strap lug (see
Figure 4-A) and back through the
sliplock (see Figure 4-B).
4-A
4-B
The strap can now be adjusted
to fit your hand. This can be
accomplished by adjusting
bottom length (see Figure 5-A)
and/or the webbing through the
sliplock (see Figure 5-B).
Once you are comfortable
with the fit of your Pro-Strap
adjustment, be sure to lace the
webbing back through the top of
the sliplock as shown (see Figure
5-B), pull tight to lock it in place.
NOTE: Adjust the hand strap so it
is loose enough to allow sufficient
hand movement to reach all of
the necessary camera controls.
Figure 5.
5-B
5-A
Excess webbing can be trimmed
off with sharp scissors or a
knife. Try to leave about an inch
of webbing beyond the sliplock.
To prevent the fibers from
unraveling, fuse them together
by briefly heating them with a
lighter or match flame
6-A
Figure 6.
If you are installing your hand strap with a Camdapter™ camera adapter on
a camera with a battery grip, be sure to test the fit with and without the grip
before trimming the web.
camera battery compartment, if not most Camdapter camera adapters are
reversible to allow more clearance if needed.
Camdapter™ leather hand straps are finished with a light coating of mink oil. Occasionally you may
notice some light hazing or dullness on the leather. A light polishing with a soft cloth will remove this
haze and restore the shine of your hand strap. (Does not apply to suede hand straps.)
For more information and to see other
Camdapter products, visit our website
@ www.camdapter.com