Datasheet

Ver 1.0
PCB
TERMINAL
BLOCKS
INTER-
CONNECTION
FUSES &
FUSE-
HOLDERS
LEDs &
INDICATORS
MINIATURE
SWITCHES
LIMIT &
SAFETY
SWITCHES
CONTROL
PRODUCTS
INTERFACE
MODULES &
SUPPORTS
RELAY
BASES
ENCLOSURES
BATTERIES
TRANS-
FORMERS
ENCLOSURES
[phone]
[e-mail]
www.camdenboss.com
We operate a constant improvement policy,
our products are subject to change without notice.
181
ELECTRONICS & ENCLOSURES
Controls Housing (DIN Rail mounting)
•12terminals
•InternalPCBguides
•SnapfitDINRail
 mountingfixtures
•MoudedinGreyFlame 
 RetardantUL94-V0PC
•Removabletopcover
•Integralmarkerplate
•ForG-railmounting
 adaptorsavaliable
•TerminalshavePCBpinsto
 minimiseinternalwiring
CCH12
SPECIFICATION
Rating
Cable entry Solid
Stranded
250VAC 10A
2x2.5 mm
2
2x1.5mm
2
TYPE NO.
CCH12
DESCRIPTION
12 terminal controls housing
DIN Rail Adaptor
Aonepieceadaptertoadapt
relaybasesandenlosurestoG
railandminidinrails
•SnapfitDinRail
 mountingfixtures
•MouldedinFlame
 retardantUL94-V0
•Symmetrical(35mm)
•Asymmetrical(G-rail)
• MiniSymmetrical(15mm)
CDR/Adapter
TYPE NO.
CDR/Adapter
DESCRIPTION
DIN Rail Adapter
Mini Top Hat 15mm
Standard Top Hat 35mm
G Section 32mm
Custom Design Service
CustomDesignedplasticenclosures,housings,covers,panels
andpartswithouttooling.
WedevelopandmanufactureenclosuresintheUKtoyour
specificationsfromflatsheetplastictechnology.
Ideallysuitedforlowtomediumbatchquantities,fromthemost
simpletocomplexenclosures.
MinimalCapitaloutlaywithnotooling,totalflexibilityof
modificationtoCAD-CAMprogramsandrapidtimetomarket.
Basic Construction
Day 1 Week 1 Week 2-3
Complex Construction
Week 1 Week 2 Week 3-4
70 +/- 0.5mm
53.3 +/- 0.5mm
89.5 +/- 0.5mm
53.5 +/- 0.5mm
Features
■ 12 terminals
■ Internal PCB guides
■ Snap fit Din Rail
mounting fixtures
■ Grey Flame Retardant
UL 94V0 Lexan
■ Removable top cover
■ Cable entry 2 x 2.5mm
2
solid
or 2 x 1.5mm
2
stranded
and terminated
■ Integral marker plate
■ For G rail mountings see
optional adapters
■ Terminals have pcb pins to minimise internal
wiring
A range of two vertical boxes designed for 5mm pitch
plug-in terminal blocks. The plates are to cover unused
terminal areas and come in either solid or perforated.
Each of the three sides of the boxes accept up to twelve ways
of terminal blocks.
External dimensions = 22.5 x 82 x 90 mm or
45 x 82 x 90 mm
CCH12 CCH12
PCB mounting with Vertical Box
Maximum pcb board dims
Type No. Description
CCH12 12 terminal controls housing
Controls Housing (Din Rail mounting)
*Each product contains: 12 way closed plate, three 4 way closed plates and three
4 way perforated plates