User's Manual

1
2
3
4
5
7
6
photos or videos. Camera brands included: Canon / Sony / Panasonic.
6. DISPLAY Set screen direction:
NORMAL: displayed in the forward direction;
REVERSE: displayed in reverse.
7. DEFAULT restores default settings:
For normal use, it need to be reset and calibrated after all settings are restored.
8. ABOUT
Emitter :controller firmware version number;
Receiver: focus motor firmware version number.
Four: Focus Motor
1. Output gear: adjust the lens’ focus, aperture, zoom by engaging with the lens focus ring.
2. Assemble fasteners: install the follower motor to the appropriate bracket.
3. Frequency auto matching button: When it cannot be connected because communication channel does not
match. Press this button to pair connection automatically.
4. Antenna: 2.4GHz/2dbi.
5. Power input interface: use 0B series P06 6-core aviation socket, input power supply DC12-18V/1.5A, When
the power is connected, the motor will open automatically, and will wait for connection with the controller.
6. Status indicator: When it is disconnected, the blue light flashes.
When connected successfully, the green light always on.
When the input voltage lower than 12V, the red light flashes.
7.Camera control interface: The interface type is MiniUSB-10P, it can be
connected to the controlled camera for remote control with a dedicated camera control cable.
1. Output gear
2. Assemble fasteners
3. Frequency auto matching
button
4. Antenna
5. Power input interface
6. Status indicator
7. Camera control interface