Owner manual
5.7 Manually releasing the gearmotor
- Insert the trilobed key into the lock, push it in and turn it clockwise ....
5.6 Mounting the endstop fins
Place the endstop fi ns onto the rack and secure them using a 3 mm Allen wrench. Their positioning limits the gate run.
Note: the gate schould not slam against the mechanical stop, when opening or closing.
Mechanical stop
Trilobed key
Knob
..... open the small door and turn the release handle clockwise.
WARNING: opening the door will
disengage the motor (i.e. it will not
function).
To operate the motor the release mecha-
nism must be fi rmly fastened.
Pag.
9
9 -
Manual code
:
119BU56
119 B U 56
ver.
1.0
1.0 01/2008 © CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH