IN-GROUND OPERATOR FOR SWING GATES FROG SERIES INSTALLATION MANUAL FROG-A 24V
“IMPORTANT INSTALLATION, SAFETY INSTRUCTIONS” “CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY” “THIS MANUAL IS ONLY FOR PROFESSIONAL OR QUALIFIED INSTALLERS” 1 Legend of symbols ENGLISH This symbol tells you to read the section with particular care. This symbol tells you that the sections concern safety issues. 2 Condition of use 2.1 Intended use The FROG operator was engineered to power residential and condominium swing gates.
4.3 Dimensions 67 ENGLISH The data and information shown in this dialogue may be changed by Came Cancelli Automatici S.p.A. at any time without prior warning. 60 160 405 330 5 Installation Installation must be carried out by expert qualified personnel and in full compliance with current regulations. 5.
5.3 Cable list and minimum thickness Type of cable Length of cable 1 < 10 m Leng. cable 10 < 20 m Leng. cable 20 < 30 m Control panel power supply 230V 3G 1,5 mm2 3G 2,5 mm2 3G 4 mm2 Motor power supply 24V 3 x 1 mm2 3 x 1,5 mm2 3 x 2,5 mm2 2 x 0,5 mm2 2 x 1 mm2 2 x 1,5 mm2 2 x 0,5 mm2 2 x 0.
.5 Assembly diagram 67 67 3 Fig.2 The data and information shown in this dialogue may be changed by Came Cancelli Automatici S.p.A. at any time without prior warning. 160 100 60 ENGLISH 5.
5.7 Manual release Fig. 5 Fig. 5-A Fig. 5-B A4366 A4365 A4364 3 6 Connecting to the control panel - We suggest making the gearmotor cable connections in shunt boxes; For further information concerning the functions, see the technical documentation for the ZL19 N – ZL 170 N control panels. brown blue Motor 1 brown R1-Ra1 Motor 1 opening brake microswitch. R1-Rc1 Motor 1 closing brake microswitch. Control panel terminals brown R2-Ra2 Motor 2 opening brake microswitch.
6.1 Adjusting the brake microswitches – Using the motor, make so that the gate leaf is max 500mm from being fully opened. At this point do a first adjustment of the (endstop) microswitches, positioning them close to the magnet. Consider that this type of endstop reads the magnetic field. You may have to repeat the procedure to increase the precision of the adjustment (fig. 6/7); ENGLISH The data and information shown in this dialogue may be changed by Came Cancelli Automatici S.p.A.
7 Safety instructions Important safety instructions Do not allow children to play or loiter within the opening/closing arc of the operator. Keep remote controls and any other command device out the reach of children, to prevent operator from being activated by accident.In the event of anomalous behaviour, stop using the operator immediately.
8 Maintenance Periodic maintenance to be carried out by the end-user is as follows: wipe clean the glass surface of the photocells; check that the safety devices work properly; remove any obstructions. We suggest checking the state of lubrication and tightness of the anchoring screws on the operator. To check the efficiency of the safety devices, move an object in front of the photocells when gate is closing. If the operator inverts the motion or stops, the photocells are working properly.
Periodic maintenance log (for end-user) (every 6 moths) Notes Segnature 8.3 Extra-ordinary maintenance The following table serves to note down any extraordinary maintenance, repairs or improvements performed by specialised firms. N.B.: Any extraordinary maintenance must be performed by specialised technicians.
Installer’s stamp Operator name Date of job Technician’s segnature Requester’s segnature The data and information shown in this dialogue may be changed by Came Cancelli Automatici S.p.A. at any time without prior warning.
CAME UNITED KINGDOM LTD UNIT 3, ORCHARD BUSINESS PARK TOWN STREET, SANDIACRE NOTTINGHAM - NG10 5BP - U.K. Tel 0044 115 9210430 Cod. 119AU35 ver. 0.1 01/07 © CAME cancelli automatici s.p.a.