Owner's manual

5
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Connections Type of cable Length of cable 1 < 10 m L. of cable 10 < 20 m L. of cable 20 < 30 m
230/400V 3F power supply
FROR CEI
20-22
CEI EN
50267-2-1
4G x 1,5 mm
2
4G x 2,5 mm
2
4G x 4 mm
2
230/400V 3F motor power supply 4G x 1 mm
2
4G x 1,5 mm
2
4G x 2,5 mm
2
Flashing lamp 2 x 0,5 mm
2
2 x 1 mm
2
2 x 1,5 mm
2
Photocell transmitters 2 x 0,5 mm
2
2 x 0.5 mm
2
2 x 0,5 mm
2
Photocell receivers 4 x 0,5 mm
2
4 x 0,5 mm
2
4 x 0,5 mm
2
power supply to accessories 2 x 0,5 mm
2
2 x 0,5 mm
2
2 x 1 mm
2
Control and safety devices 2 x 0,5 mm
2
2 x 0,5 mm
2
2 x 0,5 mm
2
Antenna connection RG58 max. 10 m
1) Right-hand gearmotor unit (MD gearmotor + CD foundation box)
2) Left-hand gearmotor unit (MS gearmotor + CS foundation box)
3) Cable box for connections
4) Control panel
5) Tuned antenna
6) Movement-indicating fl ashing lamp
7) Key-switch selector
8) Safety photocells
9) Branching pit
10) Drainage pit
11) Mechanical stops
5
4
8
1
8
7
9
10
6
2
3
3
11
11
11
5.3 Cable list and minimum thickness
N.B.: if the cable length differs from that specified in the table, then you must determine the proper cable diameter in the basis of
the actual power draw by the connected devices and depending on the standards specified in CEI EN 60204-1.
For connections that require several, sequential loads, the sizes given on the table must be re-evaluated based on actual power
draw and distances.
When connecting products other than those mentioned in this manual please see the documents provided with the products
themselves.