Owner's manual
6
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
The following applications are only examples, as the space required for unit installation and the accessories vary de-
pending on dimensions and therefore it is up to the installer to select the best solution.
Note: the following sketches show how to install the right-hand foundation box (CD).
- Dig a pit to place the foundation box into, set up the
required cable boxes and corrugated conduits – for the
connections coming from the branching pit – and the
drainage tube.
Note: the number of cables depends on the type of system
and the accessories installed.
5.4 Preparing the foundation box
- Level the foundation
box with the ground
and position the
pinion of the
foundation box in line
with the top hinge of
the gate.
MM
- Fill the pit with concrete and sink the foundation box
into it, making sure that the corrugated and drainage
tubes pass through the proper holes.