Owner manual
13
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
#,3%.3
:,
/03%.3
-/4/2&53%
!&
/.
!##&53%!&
,).%&53%
!&
/0%.
/0#,
!&
6 6 6
-.
%
%.#2!$)/
!#4
3,/73%.3
#"/!2$&53%M!&
,4
,
,4
.
#,3%.3
:,
/03%.3
-/4/2&53%
!&
/.
!##&53%!&
,).%&53%
!&
/0%.
/0#,
!&
6 6 6
-.
%
%.#2!$)/
!#4
3,/73%.3
#"/!2$&53%M!&
,4
,
,4
.
% #
#
Movement Flasher (contact capacity:
24V – 25W max.)
Flashes during the opening and
closing phases.
Warning devices
1 ON – Encoder programming - activates the opening and closing end-stops adjustment procedure.
2 deactivated. Keep the dip-switch in OFF position
6.5 Adjustments
6.4 Function selection
/.
ON
OFF
Trimmer SLOW.SENS. = Adjusts the amperometric sensitivity that controls the force of the engine developed during different
phases, slow-down; if said force becomes greater than the adjusted level, the system intervenes by inverting the direction of
movement.
Trimmer A.C.T. = Adjusts the waiting time in the opening position. Once this time frame has lapsed, an automatic closing
procedure is performed. The waiting time may be adjusted to between 1 second and 120 seconds. Adjusting to the minimum
excludes the automatic closing function.
Trimmer CL.SENS. = Adjusts the amperometric sensitivity that controls the force of the engine developed during movement
closing; if said force becomes greater than the adjusted level, the system intervenes by inverting the direction of movement.
Trimmer OP.SENS. = Adjusts the amperometric sensitivity that controls the force of the engine developed during movement
opening; if said force becomes greater than the adjusted level, the system intervenes by inverting the direction of movement.
#,3%.3
/03%.3
!#4
3,/73%.3