User's Manual

Setup
TRENDnet DSLR-2001N 35
Bridge Mode
If you select Bridge mode (RFC-1483 Bridged), the screen below is
displayed.
State of Connection — Select whether to enable or disable this
connection.
Name — Enter your desired connection name.
CIP (RFC-1577)
If you select CIP (RFC-1577 Classic RP/ARP over ATM), the screen
below is displayed.
State of Connection — Select whether to enable or disable this
connection.
Name — Enter your desired connection name.
NAT — Select whether to enable or disable NAT (Network Address
Translation). Enable this setting to share one WAN IP address with
multiple computers on your network.
External IP Address — Enter the IP address provided by your ISP.
Subnet Mask — Enter the subnet mask provided by your ISP.
Default Gateway — Enter the default gateway provided by your ISP.
DNS Enabled — Select whether to enable or disable DNS (Domain Name
System).
DNS Override Allowed — Select whether to enable or disable DNS
override.
DNS Server 1 and DNS Server 2 — If provided by your ISP, enter the
DNS server. Otherwise, leave these fields blank.