User's Manual

Setup
TRENDnet DSLR-2001N 37
network.
Wireless Mode — Select the wireless mode to limit the type of
wireless devices that can connect to the network. Options are:
• 802.11b only: Only 802.11b wireless devices can connect to
the network.
• 802.11g + 802.11b: Only 802.11g and 802.11b wireless
devices can connect to the network.
• 802.11g only: Only 802.11g wireless devices can connect to
the network.
• 802.11n + 802.11g + 802.11b: All 802.11n, 802.11g, and
802.11b wireless devices can connect to the network.
Security Setting
It is strongly recommended to enable the security settings to
secure your network from unauthorized access. Use the Security
Setting page to configure the type of security and encryption of
your wireless network.
To access the Security Setting page, click SETUP > Wireless
Settings > Security Setting or click the Security Setting button.
Name (SSID) — Select the wireless network to configure from the
drop-down list.
Security Mode — Select the security and the encryption type to use.
Select None if you do not want to use any security mode.
WEP
WEP (Wired Equivalent Policy) is the basic security method. With
WEP security, all wireless devices must enter the same key to
connect to the network.
Authentication Type — Select an authentication type. Options are: