User's Manual

Setup
TRENDnet DSLR-2001N 38
• Auto: Select Auto if you are unsure which authentication is
suitable for your wireless devices.
• Open System — Open System allows public access to the Modem
Router via wireless communications.
• Shared Key — Requires users to enter the same WEP key to
exchange data with other wireless devices.
Encryption Strength — Select 64bit to enter or generate a 10-
character key or select 128bit to enter or generate a 26-character
key.
Key Format — Select HEX to generate hexadecimal characters only or
ASCII to generate ASCII characters.
Passphrase — Enter a passphrase, then click the Generate button to
automatically generate WEP keys.
Key 1, 2, 3, 4 — When you enter a passphrase and click the
Generate button, these fields display the auto-generated keys.
Otherwise, enter the WEP key(s) manually.
Click the Apply button to save your changes or click the Cancel
button to discard your changes.
WPA (TKIP)
Select WPA (Wi-Fi Protected Access) using TKIP (Temporal Key
Integrity Protocol) for better encryption.
Authentication Type — Select an authentication type. Options are:
• PSK: Select to use a passphrase for authentication.
If you select PSK, enter a passphrase in the Confirmed
Passphrase field.
• EAP — Select to use Extensible Authentication Protocol
(EAP). This should only be used when a Radius server is
connected to your Modem Router.
If you select EAP, enter the following information:
• Radius Server IP: The IP address of the authentication
server.
• Radius Server Port: The port number used to connect to
the authentication server.