User's Manual

Advanced
TRENDnet DSLR-2001N 48
Wireless MAC Filter
This page allows you to deny or allow devices to access the
wireless network by filtering their MAC addresses.
Click Advanced > Advanced Wireless > Wireless MAC Filter or click
the MAC Filter button.
Name (SSID) — Select the SSID from the drop-down list.
To Set MAC Filter
Do the following to deny or allow a device to access to the
wireless network.
1. Select the MAC Restrict Mode. Options are:
• Disable: No restriction.
• Deny: To deny access to the wireless network.
• Allow: To allow access to the wireless network.
2. On the MAC Address field, enter the MAC address of the device
that you want to deny or allow access.
3. Click the Add button to add the MAC address to the MAC
ADDRESS LIST.
4. Click the Apply button to apply the MAC filter or click the
Cancel button to discard your changes.
To Remove MAC Filter
1. On the MAC ADDRESS LIST, click the icon to remove the
restriction on the corresponding MAC filter.
2. When prompted, click OK to confirm.