User's Manual

Advanced
TRENDnet DSLR-2001N 49
WPS Setting
Wi-Fi Protected Setup (WPS) is designed to make wireless setup
easy and yet secure. Users do not need to know the network SSID
and passphrases to use WPS to join the wireless network.
This page allows you to enable WPS-supported devices to connect to
your Modem Router.
☞
NOTE: This feature is available only in WPA-PSK, WPA2PSK, or
OPEN mode.
Click Advanced > Advanced Wireless > WPS Setting or click the WPS
Setting button.
Basic Setting
Enable WPS — Check this box to enable the WPS function.
Device Password (PIN) — Displays the PIN password. To generate a
new PIN, click the Generate New PIN button. To reset the PIN to
default, click the Reset PIN to Default button.
Click the Apply button to save your changes or click the Cancel
button to discard your changes.
Add Client
Setup Methods — Select one of the following:
• Push Button: Select to connect WPS-supported devices with a
push of a button.
• PIN: Select to prompt WPS-supported devices to enter the
PIN before allowing access to the wireless network.