User's Manual

Advanced
TRENDnet DSLR-2001N 64
DMZ — Check this box to enable DMZ.
DSL Interface — Select the DSL interface to activate DMZ from the
drop-down list.
DMZ Host IP Address — Enter the IP address of the computer to set
as the DMZ host.
Check the Apply button to save and activate DMZ.
SPI Settings
SPI (Stateful Packet Inspection) filters more kinds of attacks by
closely examining packet data structures.
To access the SPI Settings page, click ADVANCED > Firewall > SPI
Settings or click the SPI Settings button.
SPI Enable — Select whether to enable or disable the SPI function.
Endpoint Filter — Select an endpoint filter option:
• Independent: Forwards all incoming traffic from an open
port to the application that opened the port.
• Restrict: Incoming traffic must match the IP address of the
outgoing connection.
Log Dropped Packet Enabled — Select whether to enable or disable
logging of dropped packets from your network or the Internet.
Click the Apply button to save and activate the SPI settings.