User's Manual

Maintenance
TRENDnet DSLR-2001N 94
7.11 Diagnostics
This page allows you to test the connectivity of the physical and
protocol layers on the WAN side.
To access the Diagnostics page, click MAINTENANCE > Diagnostics.
To start the test, select the DSL Interface from the drop-down
list, and then click the Test button.
7.12 Reboot Device
In the event that your device does not respond correctly or stops
responding, reset your device. All your settings will be retained.
1. Click the Reset button.
2. Click OK to confirm.
3. When prompted, click OK.
☞
NOTE: Resetting your Modem Router may take some time. Do not
turn off the power until the reset is completed.