User Manual

BACKUP AND RESTORE
Restore Files and Folders
Sereniti Smart Home Networking Service | 89
• If you clicked Original Location, the files and folders are
restored to the location from which they were backed up. If
they were originally backed up from another PC, make sure the
same location exists on your PC.
• If you clicked Select Location, a CHOOSE button appears.
Click it to display a browse window and select the location to
put the restored files and folders. The location is displayed to
the right of the CHOOSE button on the Restore page.
7 Click RESTORE. A window pops up and prompts you to confirm the
restore.
8 Click OK. The Restore starts. While the restore operation is taking
place, you cannot perform a back up or clean up backed up files on the
Smart Home Server.
RESTORE AN OLD VERSION OF A FILE OR FOLDER
You can restore old versions of files and folders. To do this, follow the
steps below.
1 Click Backup and then click the Restore Backed Up Files icon to
display the Restore page (
FIGURE 7-5).
2 In the Restore Files/Folders From field, select a PC from the drop-
down list. This is the PC from which these files and folders were
originally backed up. You can select any PC in the network.
3 Go the Files/Folders to Restore field and click Select File/Folders. A
CHOOSE button appears.
4 Click CHOOSE to display a Select Folders for Restore window
(
FIGURE 7-6). This window shows the most recent backup.
5 Click ADVANCED. Up to eight previous backups for each folder and
file are shown in the left pane.
6 Select a file or folder from one of the backups and click the arrow button
between the two panes to copy it to the right pane. Repeat until all
files and folders to be restored are in the right pane.