User Manual
Sereniti Smart Home Networking Service | 97
S
HARED
S
ERVER
D
RIVES
. . . . .
. . . . . . . . . . . . . . . . . . . . . .
AND
N
ETWORK
D
EVICES
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
THIS CHAPTER
Explains how to:
• Access the Sereniti Shared Drive (S: drive)
• Connect an external storage device to the Smart Home Server
• Rename an external storage device
• Access, monitor, format, repair and remove an external storage
device
• Connect a network printer to the Smart Home Server
• Rename the printer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OVERVIEW
The Smart Home Server is equipped with an internal hard disk and two
USB ports. You can use the hard disk to store files and exchange infor-
mation with other network users, and you can use the USB ports to con-
nect storage devices and printers to the network.
SERENITI SHARED DRIVE
When the Smart Home Server is installed, an area on its hard disk is set
aside as a shared drive that you and other members of your family can
use to store files and exchange information.