User Manual

SHARED SERVER DRIVES AND NETWORK DEVICES

Overview

98 | User Manual (v1.0.0.1)

You can use the S: drive as you would any other disk drive on your PC.

Note: The Smart Home Server’s hard disk is also used to store backup

files. Therefore, the more files stored on the S: drive, the less

space available for backups.

USB PORTS

You can connect external storage devices (such as hard drives and flash

drives) and printers to the two USB ports on the back of the Smart Home

Server. You can connect two storage devices, two printers or one of

each. You can connect devices supporting either USB 2.0 or USB 1.1.

Error: System Failed to Map to S: Drive on <PC Name>

If you already have an S: drive on your PC, an Alert Box will pop

up when you log into the Command Center and tell you that the

system failed to map the Sereniti Shared Drive to the S: drive. To

allow the system to map the Sereniti Shared Drive to the S: drive,

you have to remap your existing S: drive to another letter. To do

this:

1. Close the Command Center.

2. Open the Windows Explorer.

3. Click Tools and select Map Network Drive.

4. In the Drive field, click the drop-down list and select an unused

letter.

5. In the Folder field, click Browse and select the folder currently

mapped to the S: drive.

6. Click Finish. This maps the folder to the drive letter you

selected in Step 4.

7. Right-click the S: drive and select Disconnect. This unmaps the

drive from the old letter.

8. Open the Command Center. The drive should now map properly.