User Manual

PORT FORWARDING
Delete a rule
Sereniti Smart Home Networking Service | 127
discover you subsequently need it, you can select it again. If you delete a
user defined rule you later need, you have to re-create it.
To delete a port forwarding rule, follow the steps below:
1 Click Security and then click the Network Firewall Settings icon to
display the Manage Firewalls page (
FIGURE 10-1).
2 Locate the device for which the rule was written and click EDIT to
display the Firewall Settings page (
FIGURE 10-2).
3 Locate the rules you want to delete and click the check boxes to their
left. You can select either system defined rules or user defined rules (but
not both at the same time).
4 Click DELETE. The rules are removed from the Firewall Settings page.