User Manual
Sereniti Smart Home Networking Service | 135
M
ANAGING
THE
S
MART
. . . . .
. . . . . . . . . . . . . . . . . . . . . .
H
OME
S
ERVER
12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
THIS CHAPTER
Explains how to:
• Check the Smart Home Server’s wired and wireless settings
• Change the wireless channel
• Monitor hard disk usage on the Smart Home Server
• Change the Smart Home Server’s time zone and workgroup
• Manage external storage drives
• Rename network printers
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OVERVIEW
The Smart Home Server was installed and configured for wired and
wireless operation when you set up the Sereniti Home Networking
Service (see the Installation Manual for details).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHECK THE WIRED SETTINGS
To display a page showing the device name, software version and wired
settings of the Smart Home Server, click My Network and then click
the View Smart Home Server Status icon to display the Smart Home
Server Status page (
FIGURE 12-1).