User Manual

MANAGING THE SMART HOME SERVER

Monitor Disk Usage

140 | User Manual (v1.0.0.1)

also broadcasting on channel 6 – you may want to consider changing

channels to see if this helps.

To change the channel the Smart Home Server is broadcasting on,

follow the steps below:

1 Click My Network and then click the Wireless Settings icon to display

the Wireless Settings page (

FIGURE 12-2).

2 Go to the Current Wireless Channel field and select a new channel

from the drop-down list.

3 Click SUBMIT.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MONITOR DISK USAGE

The hard disk on the Smart Home Server is used for two purposes:

• To store backups of all the PCs in your network running the

Command Center

• To provide space for the Sereniti Shared Drive (S: drive),

which network users can access and use to store and exchange

files (see Chapter 8 for additional details).

To monitor hard disk usage, click My Network and then click the View

Smart Home Server Status icon to display the Smart Home Server

Status page (

FIGURE 12-1). This page shows:

• Status of the drive (formatted or not formatted)

• Total capacity of the drive

• Amount of space currently in use

• Amount of space currently available

• Percentage of disk space in use