User Manual

USING THE COMMAND CENTER
To Do List
24 | User Manual (v1.0.0.1)
2
3 Click the device to display the Device Registration page (see Chapter 4,
FIGURE 4-3).
4 In the Device Name field, replace UNKNOWN with a name of your
choice. Use only letters, numbers, a hyphen (-) or an underscore (_). Do
not use spaces.
5 In the Device Type field, select the type of device from the drop-down
list.
6 In the Icon field, click CHANGE to open a pop-up window showing
other available icons.
7 Select an icon and click Select to close the window and return to the
Device Registration page. The new icon appears in the Icon field.
8 Click SUBMIT.
Install a firewall/antivirus/antispyware program To protect your
PCs, each PC should be running personal firewall, antivirus and antispy-
ware programs. Whenever the Smart Home Server detects a PC that is
missing one or more of these programs, it issues an alert. You should
install the missing program(s).
The Serenity Security Suite, which is provided free of charge with the
Smart Home Networking Service, contains all three programs, as well as
a pop-up blocker. To install the suite, click Security and then click the
Install Security Suite icon.
Enable a firewall/antivirus/antispyware program To protect your
PCs, the personal firewall, antivirus and anti-spyware programs running
on them should be enabled at all times. Whenever the Smart Home
Server detects a PC with one or more of these programs disabled, it
issues an alert. You should enable the program(s).
Most security programs put an icon in the Windows system tray that can
be used to enable and disable them. If you are not sure how to enable
your security programs, consult the documentation that comes with the
software.