User Manual

CONNECTING NON-PC DEVICES TO YOUR NETWORK
Overview
44 | User Manual (v1.0.0.1)
4
NETWORK MAP
Log into the Command Center. The non-PC device you just connected
appears on the Home page in the Network Map. The entry for the device
appears as an unknown device icon. The name of the device is also
UNKNOWN, and the status is simply “online.” The following shows
what such an entry looks like:
Tip: It is not a good idea to connect several devices at the same time,
because each device shows up as UNKNOWN and it is some-
times difficult to tell which device is which. A better approach is
to connect one and register it (see below) so that it has a name to
identify it, and then connect and register another, etc.
OTHER PAGES
In addition to the Network Map, UNKNOWN entries are also placed in
the Device Management page (see Chapter 3,
FIGURE 3-2) and the Man-
age Firewalls page (see Chapter 10,
FIGURE 10-1).
Device Management Page The entry in the Device Management
page appears under the heading Non-Enabled PCs and Other Devices.
Click My Network and then click the Device List icon to display this
page (
FIGURE 4-1).
FIGURE 4-1 Device Management Page (Non-PC Devices)