User Manual

2
UNPACKING AND SETUP
This section provides unpacking and setup information for the IEEE 802.11a/b/g/n
2.4GHz/5GHz Dual-Band Wireless LAN USB 2.0 Adapter.
Unpacking
The box should contain the following items:
 One the IEEE 802.11a/b/g/n 2.4GHz/5GHz Dual-Band Wireless LAN USB
Adapter
 One Driver & Utility CD-ROM
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
Before installation, check the following:
 Make sure your computer is running at least a 300MHz or above processor with
256MB RAM or above
 Make sure the USB port is USB 2.0 port
 The operating system on your computer must be the following: Windows 2000
(Service Pack 4), XP (Service Pack 2), Windows Vista
 An 802.11n or 802.11a/b/g access point.
 Make sure the environment has minimal interference and obstructions.