User Manual

3
IDENTIFYING EXTERNAL COMPONENTS
LED
When the LED is blinking, the WLAN Adapter is transmitting or receiving data on
the Wireless Ethernet network.
Check the installation
The LED of the IEEE 802.11a/b/g/n 2.4GHz/5GHz Dual-Band Wireless LAN USB
2.0 Adapter is clearly visible and the status of the network link can be seen instantly:
1. When connected to the USB port and the driver were installed, the LINK LED
will start blinking, and it means that the device is starting to scan a wireless
device near the IEEE 802.11a/b/g/n 2.4GHz/5GHz Dual-Band Wireless LAN
USB 2.0 Adapter.
2. While the IEEE 802.11a/b/g/n 2.4GHz/5GHz Dual-Band Wireless LAN USB
2.0 Adapter linked up to the Access Point or to other Wireless LAN station, the
LINK LED will always light up.