User's Manual

IP Setting

This page allow user to set LAN port properties, such as the IP address, subnet

mask, DNS and DHCP Server setting.

LAN IP: Select the LAN IP configuration type “Obtain IP Automatically” or Fixed

IP”. If the “Obtain IP Automatically” is selected, the IP address will obtain by

DHCP server. Otherwise, if the “Fixed IP” is selected, the default IP address of this

AP is 192.168.10.100 with the subnet mask of 255.255.255.0 and Gateway address

is 192.168.10.254, user can enter other values for IP Address, Subnet Mask and

Gateway, click “Apply” button for the changes to be effective.

DHCP Server: selected the “Enable” to enable the DHCP Server to allow the AP

to automatically assign IP addresses to devices connecting to the WLAN.

Start IP / End IP: Type an IP address range that DHCP will use the IP address

range to assign IP addresses to all WLAN devices connected to the AP.

Domain Name: Type the local domain name of the network in the text box. This

item is optional.

Lease Time: The lease time specifies the amount of connection time a network

user be allowed with their current dynamic IP address.