User's Manual

5
HARDWARE INSTALLATION
LED Indicator
PWR (POWER)
The PWR indicator lights green when the WLAN CardBus Adapter is
receiving power, otherwise, it is off.
LNK (LINK)
The LNK indicator blinks green when the WLAN CardBus Adapter is
connected to a network successfully. Otherwise the LNK indicator is
off.
Check the installation
The LEDs of the WLAN CardBus Adapter are clearly visible and the
status of the network link can be seen instantly:
1. Once the device is plugged to the station’s CardBus slot, the
PWR LED of the WLAN CardBus Adapter will light up
indicating a normal status.
2. When the device plugged to the station’s CardBus slot and the
driver was installed, the LNK LED will start blinking and off
three seconds continuously, it means that the device is starting to
scan the 802.11b wireless devices near the WLAN Card Bus
Adapter.
3. While the WLAN CardBus Adapter linked up to the Access Point
or to other Wireless LAN station, the LNK LED will always light
up.